Answer

Mar 14, 2025 - 02:58 AM
To install the ETNA KG959RVSA Gas Hobs, it is recommended to have a registered Corgi gas fitter carry out the fitting. Before installation, please read the safety regulations provided in the instruction manual. Here are the steps for installation:
1. Preparations for installation:
- Ensure that the gas connection complies with national and local regulations.
- Check the appliance label for technical gas data.
- Make sure the appliance is earthed.
2. Free space around the appliance:
- Refer to the table provided in the manual for the minimum required free space measurements (A, B, C, D, E) based on the specific model of the gas hob.
3. Gas connection:
- Follow the gas connection instructions provided in the manual.
- Ensure that the gas connection is gastight.
- If converting the appliance for use with another type of gas, refer to the conversion set manual and use the specified conversion set.
4. Building in:
- Follow the building-in instructions provided in the manual.
5. Connecting and testing:
- Connect the gas hob to the electrical supply according to the electrical connection instructions provided in the manual.
- After installation, check that all connections are gastight.
- Perform a thorough testing of the gas hob to ensure proper functionality.
Please note that the above instructions are a general overview. For detailed and specific instructions, it is important to refer to the ETNA KG959RVSA Gas Hobs Instruction Manual provided with the product.
Add New Comment