How do I install the Blink HQ 200 Smart Home Level 2 EV Charging? (Blink HQ 200 Smart Home Level 2 EV Charging Instruction Manual)

Answer

manuals.plus

Mar 14, 2025 - 02:57 AM

1. Before starting the installation, make sure to read and understand all the safety instructions provided in the manual. Ensure that you have the necessary knowledge and understanding required for the installation.

2. Disconnect the electrical power before installing the Blink Charging Station to avoid any risk of electric shock or damage to the electrical system and the Blink product.

3. The Blink product should be installed by a licensed contractor or electrician in accordance with all applicable state, local, and national electrical codes and standards. Consult with a licensed professional to ensure compliance with local building practices, safety standards, and codes.

4. Use the appropriate tools for installation, including a security Torx T20 driver, wire cutters, wire strippers, torque wrench, drill, drill bits, slotted screwdriver, P3 Phillips screwdriver, and heat shrink tube.

5. Ensure proper grounding by connecting the product to a grounded, metal, permanent wiring system. Run an equipment grounding conductor with the circuit conductors and connect it to the equipment grounding terminal or lead on the product.

6. Follow the step-by-step installation instructions provided in the manual, including removing the front cover, installation cover, and setting the maximum current by configuring the DIP switch.

7. Secure the main body mounting bracket to the wall using appropriate screws based on the wall material (M6 mechanical screws for masonry walls, #12 self-tapping screws for finished walls supported by wood studs).

8. Hang the product on the mounting bracket and slide it down to rest on the bottom flange. Install the locking screws (M4 Torx) to secure the product in place.

9. Reassemble the installation cover and front cover using M4 screws.

Please note that this is a general overview of the installation process. For detailed instructions and specific requirements, refer to the Blink HQ 200 Smart Home Level 2 EV Charging Instruction Manual provided by the manufacturer.