User Manual Q&AAnswer
Mar 14, 2025 - 02:41 AM
To attach the battery pack on the SKIL IW6739B-00 20V Brushless Impact Wrench, follow these steps:
1. Make sure the variable-speed trigger switch is in the "OFF" position by placing the direction-of-rotation (forward/center-lock/reverse) selector in the center position.
2. Align the raised rib on the battery pack with the grooves on the tool.
3. Slide the battery pack onto the tool until it locks into place. Ensure that the latches snap into place properly.
To detach the battery pack, follow these steps:
1. Depress the battery-release button, located on the front of the battery pack, to release the battery pack.
2. Pull the battery pack out and remove it from the tool.
Please refer to the SKIL IW6739B-00 20V Brushless Impact Wrench Owner's Manual for more detailed information and illustrations.
Add New Comment