User Manual Q&AAnswer
Mar 14, 2025 - 02:33 AM
To install the V-TAC VT-8141 LED Cabinet Lighting with Sensor, please follow these steps:
1. Make sure to turn off the power before starting the installation.
2. The installation must be performed by a qualified electrician.
3. Use the provided 3M adhesive tape to stick the lamp on the position where you want to install it. Avoid installing it in a place where the surface is painted.
4. The lamp has a built-in magnet, so you can also use the 3M buckle to absorb the magnet and attach it to a metal surface.
5. Please refrain from installing the lamp in a hot and humid place, or in a place with a lot of dust or oily smoke.
6. Ensure that the lamp is installed in a dry environment, as it is not waterproof.
For more detailed instructions and diagrams, please refer to the V-TAC VT-8141 LED Cabinet Lighting with Sensor Instruction Manual.
Note: If you are unsure about the installation process or have any other queries or issues with the product, it is recommended to contact the dealer or local vendor from whom you have purchased the product. They are trained and ready to assist you.
Add New Comment