How do I install the Paul Neuhaus LED Wall Light? (Paul Neuhaus LED Wall Light Instruction Manual)

Answer

manuals.plus

Mar 14, 2025 - 01:23 AM

Installation of the Paul Neuhaus 9489 LED Wall Light is relatively straightforward. Here is a step-by-step guide based on the provided instruction manual:

1. Before starting the installation, ensure that the power supply is switched off to avoid any electrical hazards.

2. Determine the desired location for mounting the wall light. Make sure it is suitable for the weight and dimensions of the product.

3. Mark the positions where the screws will be inserted. The manual recommends using a spirit level to ensure the light is straight.

4. Drill holes at the marked positions using an appropriate drill bit, depending on the wall material. The manual suggests using a 6 mm drill bit for solid walls.

5. Insert the supplied wall plugs into the drilled holes.

6. Connect the wires from the wall light to the electrical supply. The manual advises seeking the assistance of a qualified electrician for this step if you are unsure about electrical connections.

7. Attach the wall light to the wall by aligning the mounting holes with the wall plugs. Use the provided screws to secure the light in place.

8. Once the light is securely mounted, switch on the power supply to test its functionality. If it does not work, double-check the electrical connections and consult the troubleshooting section of the manual.

9. Finally, adjust the position of the light if necessary, ensuring it provides the desired illumination.

Please note that this is a general guide based on the information provided in the manual. It is always recommended to refer to the specific instructions and guidelines provided by the manufacturer for accurate installation.