User Manual Q&AAnswer
Mar 14, 2025 - 01:20 AM
To install the Paul Neuhaus 6958 LED Ceiling Spotlight, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power supply is turned off.
2. Determine the desired location for the spotlight on the ceiling. Make sure the surface is suitable for mounting and can support the weight of the spotlight.
3. Remove the cover of the spotlight by gently pulling it downwards. This will expose the mounting bracket.
4. Attach the mounting bracket to the ceiling using screws appropriate for your ceiling type. Ensure that the bracket is securely fixed.
5. Connect the electrical wires from the ceiling to the spotlight. The spotlight should have three wires: live (brown or black), neutral (blue), and ground (green/yellow). Connect the corresponding wires from the ceiling to the spotlight using wire connectors or terminal blocks.
6. Once the wiring is complete, carefully tuck the wires into the ceiling opening and position the spotlight onto the mounting bracket. Ensure that the spotlight is aligned properly.
7. Secure the spotlight to the mounting bracket using the provided screws. Make sure it is firmly attached.
8. Finally, attach the cover back onto the spotlight by aligning it with the base and pushing it upwards until it clicks into place.
9. Turn on the power supply and test the spotlight to ensure it is functioning correctly.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific instructions provided in the Paul Neuhaus 6958 LED Ceiling Spotlight Instruction Manual for accurate installation steps and any additional precautions.
Add New Comment