User Manual Q&AAnswer
Mar 14, 2025 - 01:17 AM
To install the Paul Neuhaus 19223 Globe Light, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Before starting the installation, make sure the power supply is switched off to avoid any electrical accidents.
2. Determine the location where you want to install the Globe Light. Ensure that the surface is sturdy enough to support the weight of the light fixture.
3. Remove the mounting plate from the packaging and hold it against the desired installation surface. Mark the positions for the xxxx holes using a pencil or marker.
4. Drill holes at the marked positions using an appropriate drill bit, considering the size of the screws provided with the light fixture.
5. Insert the provided wall plugs into the drilled holes.
6. Align the mounting plate with the drilled holes and attach it to the wall using the screws provided. Ensure that the plate is securely fastened.
7. Connect the wires from the power supply to the corresponding wires of the Globe Light. Follow the color coding mentioned in the instruction manual for proper connection (e.g., black to black, white to white, etc.). Use wire connectors or terminal blocks to secure the connections.
8. Carefully tuck the wires into the mounting plate and ensure they are not exposed or tangled.
9. Gently attach the Globe Light to the mounting plate by aligning the xxxx holes on the light fixture with the screws on the mounting plate. Securely tighten the screws to hold the light in place.
10. Once the installation is complete, switch on the power supply to test the functionality of the Globe Light. If everything is working correctly, you can adjust the light direction and intensity as desired.
Please note that the above instructions are a general guide. It is essential to refer to the specific instructions provided in the Paul Neuhaus 19223 Globe Light instruction manual for accurate installation steps and safety precautions.
Add New Comment