User Manual Q&AAnswer
Mar 14, 2025 - 01:11 AM
Sure! Here are the step-by-step instructions on how to install the Paul Neuhaus 4720 LED Table Lamp:
1. Unpack the lamp: Start by carefully unpacking the lamp and removing all packaging materials.
2. Connect the power cord: Locate the power cord attached to the lamp. Plug the power cord into a suitable electrical outlet.
3. Position the lamp: Decide where you want to place the lamp. Ensure that there is enough space and a stable surface to support the lamp.
4. Adjust the lamp head: The Paul Neuhaus 4720 LED Table Lamp features an adjustable lamp head. You can tilt and rotate the lamp head to direct the light as desired. Simply hold the lamp head and adjust it to your preferred position.
5. Turn on the lamp: Locate the power switch on the lamp. Depending on the model, it may be a switch on the base or a touch-sensitive switch on the lamp head. Turn on the lamp by toggling the switch or touching the designated area.
6. Enjoy your lamp: Once the lamp is turned on, you can adjust the brightness if applicable, and enjoy the illumination provided by the Paul Neuhaus 4720 LED Table Lamp.
Please note that these instructions are general guidelines based on typical installation procedures. For specific details and safety precautions, it is always recommended to refer to the official instruction manual provided by Paul Neuhaus GmbH.
Add New Comment