Answer

Mar 14, 2025 - 01:01 AM
To assemble the JASIWAY vB2130D 78.7 Inch Beige TV Stand, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Start by assembling the bottom panel and back panel. Use four cam locks (A) and four rods (B) to connect the back panel and bottom panel. Make sure to cover the back panel with the wire cover (F) after installation.
2. Next, assemble the left middle panel (④), middle panel (⑱), and right middle panel (⑲). Use six cam locks (A), six rods (B), and four 8*30 wood dowels (E) to connect these panels. Install guide rails (L) on the left and right middle panels using eight 3.5*16 self-tapping screws (N).
3. Assemble the left outer side panel (③), right outer side panel (⑭), left cabinet foot (⑩), and right cabinet foot (⑰). Use four 6*30 big flat screws (H) to fix the cabinet feet on the outer side panels. Ensure that you install the outer feet in the correct direction. Install guide rails (L) on the inside of the outer side panels using four 3.5*14 self-tapping screws (I).
4. Connect the outer side panels to the previously assembled panels using four cam locks (A), four rods (B), and four 8*30 wood dowels (E).
5. Assemble the top panel (①) using 14 cam locks (A), 14 rods (B), and 10 8*30 wood dowels (E).
6. Fix the middle feet (⑪) on the bottom panel (②) using two 8*30 screws (M). Install adjustable foot pegs (O) on each cabinet foot.
7. Assemble the drawers by connecting the left side panel (⑦), tail panel (⑧), and right side panel (⑯) using four cam locks (A) and four rods (B). Place the bottom panel (⑨) along the slot of the side and tail panels, then tighten it using four cam locks (A) and four rods (B). Install guide rails (L) on the outside of the side panels using four 3.5*16 self-tapping screws (N). Install the handle (D) on the drawer panel (⑥) using two 4*20 handle screws (G).
8. Install the glass panel by attaching eight laminate glass holders (K) on the left middle panel, middle panel, and right middle panel. Place the glass panel (⑬) and tighten the screws of the laminate glass holders (K).
9. Install the left and right cabinet doors by using 16 3.5*14 self-tapping screws (I) and four middle curved door hinges (J). Install the handle (C) on the doors using two 4*20 handle screws (G).
Please refer to the manual for any additional details or illustrations that may assist you during the assembly process.
Add New Comment