User Manual Q&AAnswer
Mar 14, 2025 - 12:56 AM
To install the Exclusive Home RD013594DSEH 84-160 Inches Patio Curtain Rod, follow these steps:
1. Gather the following tools: pencil, measuring tape, screwdriver, and electric drill.
2. Position the brackets in a desired location above the window. Use a pencil to mark the wall xxxx locations. Both brackets should be an equal distance from the outside of the window, with a third bracket in the center. It is recommended to hang the curtain rod set on the wall outside of the window frame for the best appearance.
3. Allow 1 to 3 inches (2.5 to 7.6 cm) on each side of the window and 2 to 4 inches (5 to 10 cm) above the window frame.
4. If fixing to drywall, check for buried cables and pipes before using a drill bit. Drill to a depth of 32mm and insert anchors. If fixing to a wooden batten, no anchors are required.
5. Mount the brackets with the wall screws provided.
6. Connect the three-piece rod together. The rod with the smallest diameter is the middle piece. Remove all attached finials to find the smaller middle piece resting inside the larger end piece.
7. Fit one finial to one end of the rod. Slide the curtain onto the rod before fitting the other finial.
8. Place the curtain rod onto the brackets and tighten the thumb screws.
Please refer to the instruction manual provided with the product for more detailed information and illustrations.
Add New Comment