Answer

Mar 13, 2025 - 11:43 PM
To replace a blown fuse in the GE Lighting 71256 20L 9.5 Inch H Jewel Tree TOP, follow these steps:
1. Make sure the product is unplugged before changing fuses.
2. Grasp the plug and remove it from the receptacle or outlet device. Do not pull on the cord to unplug.
3. Using a flathead screwdriver, open the fuse cover by sliding open the fuse access cover on top of the attachment plug towards the blades.
4. Carefully remove the blown fuse.
5. Replace the blown fuse with a 3 Amp, 125 Volt fuse (provided with the product). This is important to prevent the risk of fire.
6. Close the fuse cover by sliding it closed on top of the attachment plug.
7. Make sure the door is fully closed and the fuses are completely covered.
8. Do not replace the attachment plug as it contains a safety device (fuse) that should not be removed. If the attachment plug is damaged, discard the product.
It is important to follow these instructions carefully to ensure the safe replacement of the fuse. If you have any further questions or need assistance, you can contact customer service at 1-877-398-7337 or visit the GE Lighting website at www.GEholidaylighting.com.
Add New Comment