Answer

Mar 13, 2025 - 11:34 PM
To replace a bulb in the GE Lighting CFPDI-50 50 Lights set, please follow these steps:
1. Ensure that the set is unplugged before starting the bulb replacement process.
2. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
3. Hold the bulb by the plastic base and pull the bulb/base straight out of the socket.
4. Replace the bulb with a 2.5 Volt, 0.425 Watt super bright midget push-in type lamp provided with the product. Push the spare bulb/base assembly into the socket. Do not twist the bulb when inserting it into the socket. If the spare bulbs provided with the product have no plastic base or the plastic base does not fit, follow these steps:
a. Remove the old bulb by straightening the bulb wires and pulling the bulb straight from the base.
b. Replace the new bulb by straightening the bulb leads and aiming each wire into a separate hole in the plastic base.
c. Make sure each bulb lead comes out an exit opening at the bottom of the plastic base. Now bend each lead up such that each bulb lead fits closely against the narrow side of the plastic base.
5. Once the new bulb is securely in place, you can plug the set back into the power source.
Please note that it is important to use the specified bulb type (2.5 Volt, 0.425 Watt) to ensure proper functioning of the product.
Add New Comment