How do I assemble the Unbranded White HDPE Plastic Outdoor Picnic Table? (UNBRANDED White HDPE Plastic Outdoor Picnic Table Instructions)

Answer

manuals.plus

Mar 13, 2025 - 11:10 PM

Assembly Instructions for Unbranded H-W113839326 6 ft. White HDPE Plastic Outdoor Picnic Table:

1. Lay out all the components of the picnic table and ensure that you have all the necessary parts.

2. Start by assembling the seat and backrest. Take one seat plank and align it with the pre-drilled holes on one side of the table frame. Insert the provided screws through the holes and tighten them using a screwdriver or drill. Repeat this step for the remaining seat planks.

3. Next, attach the backrest planks to the back of the seat. Align the backrest planks with the pre-drilled holes on the back of the seat and insert the screws through the holes. Tighten the screws to secure the backrest in place.

4. Now, assemble the table top. Place the table top plank on top of the table frame, aligning the pre-drilled holes. Insert the screws through the holes and tighten them to secure the table top.

5. Attach the table legs to the table frame. Position one leg at each corner of the table frame and align the pre-drilled holes. Insert the screws through the holes and tighten them to secure the legs.

6. Once all the components are securely attached, double-check all the screws to ensure they are tightened properly.

7. Your Unbranded H-W113839326 6 ft. White HDPE Plastic Outdoor Picnic Table is now assembled and ready to use.

Note: It is recommended to have at least two people for assembly to make it easier and safer. Follow the instructions carefully and refer to the provided manual for any additional guidance or safety precautions.