User Manual Q&AAnswer
Mar 13, 2025 - 11:02 PM
To install the GIGABYTE P1000GM Power Supply, please follow these steps:
1. Unscrew and open the side panel of your computer chassis.
2. Install the power supply in the designated area.
3. Connect the 20+4 Pin connector from the power supply to your motherboard.
4. Connect the 4+4 Pin connector from the power supply to your CPU on the motherboard.
5. Connect other connectors, such as PCI-E (6+2pin), SATA, and Molex, from the power supply to your system components, ensuring they are securely connected.
6. Close the chassis and reattach the case screws.
7. Plug in the power cord of the power supply and switch on the power.
Please note that it is important to unplug or switch off the power supply before installing it. Additionally, make sure the power source is consistent and stable before switching on the power supply. Do not plug or unplug the power cord when the power supply is on, as it can cause damage to your components. Avoid using the power supply in high humidity or high-temperature environments.
For any further assistance or if the power supply is not working properly, please contact the GIGABYTE Product Service Center.
Please refer to the GIGABYTE P1000GM Power Supply User Manual for more detailed instructions and illustrations.
Add New Comment