Answer

Mar 13, 2025 - 11:01 PM
To set up the Crazy Fast 662423 Flip and Fly Carnival playset, follow these steps:
1. Pull the top flap down and open the box. Remove all the contents from the box and set them aside.
2. Pull the panel up to extend the playset.
3. Carefully pull out the sides to extend the stages.
4. Insert the extension board to the top of the box by sliding it onto the score panel. Make sure the middle tab sits in front of the score panel.
5. Ensure that the cardboard tab slips into the bottom of the bell striker base.
6. Place the flip striker against the score panel. The distance between the ramp and the center of the flip striker should be approximately 7.3 inches (18.5cm).
7. Hook the ramp up against the flaps to launch and flip your vehicle.
Note: The ramp is designed to make your vehicle flip.
For visual reference, you can also refer to the instructional video mentioned in the manual.
Please keep in mind that the manual provides illustrations for reference, and the actual contents may vary in style.
Add New Comment