User Manual Q&AAnswer
Mar 13, 2025 - 10:44 PM
To install the Paul Neuhaus 12103 LED Panel, you will need the following tools:
1. Screwdriver
2. Drill (if necessary for mounting)
Please follow the steps below for installation:
1. Ensure that the power supply is turned off before starting the installation process.
2. Choose a suitable location for the LED panel. It should be mounted on a solid and stable surface.
3. Use a screwdriver to remove the screws from the back of the LED panel.
4. Carefully detach the back cover of the LED panel.
5. If necessary, use a drill to create holes for mounting the LED panel. Make sure to follow the recommended hole dimensions provided in the manual.
6. Align the LED panel with the mounting holes and secure it in place using the screws provided.
7. Once the LED panel is securely mounted, reattach the back cover and tighten the screws.
8. Connect the LED panel to the power supply according to the wiring diagram provided in the manual.
9. Turn on the power supply and test the functionality of the LED panel.
Please note that it is always recommended to refer to the specific instructions provided in the for detailed installation guidelines and safety precautions.
Add New Comment