User Manual Q&AAnswer
Mar 13, 2025 - 10:43 PM
To install the Paul Neuhaus 14303 LED Panel, you will need the following tools: a screwdriver, a drill, and a measuring tape. Here are the steps to follow:
1. Ensure that the power supply is turned off before starting the installation process.
2. Determine the desired location for the LED panel on the ceiling or wall. Use a measuring tape to mark the exact position.
3. If necessary, use a drill to create holes for the mounting screws. Make sure the holes align with the mounting holes on the back of the LED panel.
4. Insert the provided screws into the holes and tighten them using a screwdriver.
5. Connect the LED panel to the power supply. Follow the instructions in the manual for the specific wiring configuration.
6. Once the LED panel is securely mounted and connected, turn on the power supply and test the functionality of the panel.
Please refer to the Paul Neuhaus 14303 LED Panel Instruction Manual for more detailed instructions, including any specific safety precautions and wiring diagrams.
Add New Comment