Answer

Mar 13, 2025 - 10:01 PM
To assemble the VONROC VC507DC Cordless Vacuum Cleaner, follow these steps:
1. Before any work on the power tool, remove the battery. The battery must be charged before first use.
2. Insert the battery into the base of the machine until it clicks into place.
3. To remove the battery, push the battery unlock button and pull the battery out of the machine.
4. To check the battery charging status, push the button on the battery shortly. The battery has 3 lights indicating the charge level.
5. To charge the battery, take it out of the machine and slide it onto the charger. Plug the charger into an electrical outlet and wait for the LED indicators on the charger to light up and show the charging status.
6. After the battery is fully charged, remove the charger plug from the outlet and remove the battery from the charger.
To use the VONROC VC507DC Cordless Vacuum Cleaner, follow these steps:
1. Make sure the machine is properly assembled and the battery is inserted.
2. For vacuuming, connect the suction hose to the vacuum port on the machine. For blowing, connect the suction hose to the blowing port.
3. Attach the desired nozzle (round or crevice) to the hose.
4. Switch on the machine by moving the On/Off switch forwards (direction ON).
5. For vacuuming, move the machine over the desired area to clean. For blowing, direct the airflow at the work area.
6. To switch off the machine, move the On/Off switch backwards (direction OFF).
7. After use, turn off the machine, remove the battery, empty the container, and clean the machine with a soft cloth.
Please refer to the provided manual for more detailed instructions and safety information.
Add New Comment