User Manual Q&AAnswer
Mar 13, 2025 - 09:53 PM
To connect the RULLZ MS2130 HDMI Video Capture to your computer and start recording, please follow these steps:
1. Connect the UHD signal source (such as a camera or gaming console) to the HDMI input of the video capture using an HDMI cable.
2. Connect your computer to the USB port of the video capture using a USB cable.
3. Install the necessary software for video capture. The RULLZ MS2130 HDMI Video Capture supports most acquisition software, such as VLC, OBS, and Amcap.
4. Open the software on your computer.
5. Choose the source of "Video Capture Device" in the software.
6. Set the desired size of the image.
7. Choose "Studio Mode" (double window) if available in the software.
8. Click on "Start Recording" to begin capturing the video.
Please note that the specific steps may vary depending on the software you are using. Refer to the software's user manual or documentation for more detailed instructions on how to use it with the video capture device.
For further assistance, please refer to the user manual provided with the RULLZ MS2130 HDMI Video Capture.
Add New Comment