User Manual Q&AAnswer
Mar 13, 2025 - 09:45 PM
To connect the Yorkville SA221S subwoofer to your audio system, follow these steps:
1. Locate the Input Jack on the subwoofer. It is a female XLR connector.
2. Use a balanced XLR cable to connect the output of your audio source (such as a mixer or amplifier) to the Input Jack of the subwoofer.
3. Make sure the power switch on the subwoofer is in the Off position.
4. Connect the power cord to the PowerCON TRUE inlet on the subwoofer.
5. Plug the other end of the power cord into a properly grounded AC power outlet.
6. Turn on the power switch on the subwoofer.
7. Adjust the SA221S Level control to set the volume level of the subwoofer relative to the input signal level.
Note: It is important to use balanced sources and proper grounding to reduce noise and ensure safety. Make sure to read and follow all safety instructions in the owner's manual.
Add New Comment