Answer

Mar 13, 2025 - 09:40 PM
To connect the Yorkville SA102 Array Series Powered Speaker to a power source, follow these steps:
1. Locate the PowerCON TRUE AC Loop Thru on the back of the speaker. This is where you will connect the power cord.
2. Use a locking PowerCON TRUE power cord to connect the speaker to a power outlet. Make sure the cord is securely plugged in.
3. Ensure that the voltage of the power source matches the voltage specified in the owner's manual or marked on the speaker.
4. Once the power cord is connected, turn on the power switch located on the front or side of the speaker. The green power LED should illuminate, indicating that the speaker is receiving power.
Note: It is important to use the proper power cord and not exceed the current rating of the power cord. Refer to the owner's manual for more information on power requirements and safety precautions.
Please refer to the owner's manual for detailed instructions and safety guidelines regarding the power connection of the Yorkville SA102 Array Series Powered Speaker.
Add New Comment