User Manual Q&AAnswer
Mar 13, 2025 - 09:34 PM
To adjust the thickness of the cuts on the de Buyer Swing Plus Mandoline, follow these steps:
1. Locate the upper plate on the mandoline. This plate allows for adjusting the thickness of the cuts.
2. Look for the wheel on the upper plate. This wheel has markings in millimeters to indicate the cutting thickness.
3. Press on the wheel and keep it pressed while turning to adjust the thickness. The plate will slide up or down according to the chosen thickness.
4. Use the markings on the wheel for a precise adjustment. You can set the thickness up to a maximum of around 10 mm (3/8").
5. Once you have set the desired thickness, release the wheel and it will lock in place.
6. The mandoline is now adjusted to produce slices or cuts of the chosen thickness.
Please note that it is important to handle the mandoline and its blades with caution, using the provided receptacle and pusher to protect your fingers from the sharp blades. Always follow the safety precautions mentioned in the manual and keep the mandoline out of the reach of children.
Add New Comment