User Manual Q&AAnswer
Mar 13, 2025 - 09:30 PM
To set the time on the BRASSELER 7001800CM3000 Weather Station Wall Clock MyTime Jumbo, you have two options: automatic time setting via the DCF time signal or manual time setting.
For automatic time setting:
1. Insert the batteries into the wall clock and wait until the indoor temperature is displayed.
2. If the clock does not receive the DCF time signal automatically, press and hold the DOWN button for 3 seconds to initiate a manual search for the signal.
3. Wait for approximately 2-5 minutes until the current time is displayed. If the signal for daylight saving time is received, "DST" will be displayed.
For manual time setting:
1. Press and hold the SET button in normal time display mode for approximately 3 seconds to enter time setting mode. The year figure will start flashing.
2. Use the UP or DOWN button to change the value for the year.
3. Press the SET button again to switch to the next setting (month, day, 12/24 hour mode, time zone, hours, minutes, weekday language).
4. Repeat steps 2 and 3 to set the other values in the desired sequence.
5. After setting the value for the minutes, press the SET button again to save and exit time setting.
Please refer to the instruction manual for more detailed instructions and illustrations.
Add New Comment