Answer

Mar 13, 2025 - 09:24 PM
To connect the AGUNTO AGU-AQ1 Air Quality Meter to your Wi-Fi network, please follow these steps:
1. Turn on the air quality monitor by long pressing the power button.
2. Press the Mode button for 2 seconds to enter pairing mode. When pairing mode is enabled, the Wi-Fi icon on the air quality monitor will blink rapidly.
3. Open the Argento app on your smartphone or tablet.
4. In the app home page, click on "Add device" or press the "+" button in the upper right corner.
5. Select "Measuring Instruments" and then choose "AGU-AQ1" from the list.
6. Follow the instructions in the app to connect the device to your Wi-Fi network. The app will start searching for nearby devices.
7. Once the app finds the AGU-AQ1 Air Quality Meter, select it and enter your Wi-Fi network credentials (SSID and password) when prompted.
8. Wait for the app to complete the connection process. Once connected, you will be able to view the air quality measurements on your smartphone or tablet.
Note: Make sure your Wi-Fi router is a 2.4GHz connection as the AGU-AQ1 Air Quality Meter does not support 5GHz Wi-Fi routers. If your router is set to 5GHz, contact your internet service provider to switch it to a 2.4GHz connection.
Add New Comment