How do I install and mount the Paul Neuhaus Ceiling Light? (Paul Neuhaus Ceiling Light Instruction Manual)

Answer

manuals.plus

Mar 13, 2025 - 09:20 PM


To install and mount the Paul Neuhaus 6965 Ceiling Light, please follow the steps outlined in the instruction manual provided with the product. Here is a step-by-step guide:

1. Before starting the installation, ensure that the power supply is turned off at the main switch.

2. Carefully unpack the ceiling light and check if all the components are included as mentioned in the manual.

3. Determine the location where you want to install the ceiling light. Ensure that the ceiling is suitable for mounting and can support the weight of the light fixture.

4. Attach the mounting bracket to the ceiling using screws appropriate for your ceiling type. Make sure the bracket is securely fixed.

5. Connect the electrical wires from the ceiling to the wires of the ceiling light. Follow the color coding (usually black to black, white to white, and green or copper to the ground).

6. Gently lift the ceiling light and align it with the mounting bracket. Carefully insert the screws provided into the holes on the light fixture and tighten them to secure the light in place.

7. Once the light is securely mounted, restore the power supply by turning on the main switch.

8. Test the functionality of the ceiling light by switching it on and off.

Please note that the above instructions are a general guide. It is always recommended to refer to the specific instruction manual provided with the Paul Neuhaus 6965 Ceiling Light for detailed and accurate installation instructions.