Answer

Mar 13, 2025 - 09:07 PM
To install the BORA PORTAMATE PM-3245 Mobile Base Extension, please follow these steps:
1. Start by installing the wheels in the wheel brackets using the flange nuts provided.
2. Decide on the position of the foot lever based on your preference and attach it using the four M6 bolts and nyloc nuts.
3. Install the T-bracket using the two M10 hex bolts, flat washers, and hex nuts.
4. Slide the extension bar into place without bolting it in at this point.
5. Bolt the bracket to the PM-3500 mobile base using the two M10 hex bolts, flat washers, lock washers, and hex nuts.
6. Adjust the extension bar to the correct length and bolt it into place using the M10 flanged hex bolts.
Please refer to the provided instruction manual for visual diagrams and additional details on each step of the installation process.
If you encounter any difficulties or have further questions, please contact the BORA Tool Customer Service Department at 866-588-0395 or visit their website at www.boratool.com for assistance.
Add New Comment