Answer

Mar 13, 2025 - 08:58 PM
Installation and Operation Instructions for Paul Neuhaus 826896 SILEDA Ceiling Light Aluminium 4 Light Sources:
1. Unpack the product and make sure all the components are included in the package.
2. Before starting the installation, ensure that the power supply is switched off.
3. Mount the ceiling bracket to the desired location on the ceiling using appropriate screws and anchors.
4. Connect the electrical wires from the ceiling to the corresponding wires on the ceiling bracket. Make sure to follow the electrical codes and regulations of your country.
5. Attach the light fixture to the ceiling bracket using the provided screws.
6. Insert the light bulbs into the light sources and make sure they are securely fitted.
7. Switch on the power supply and test the functionality of the light sources.
8. To operate the light, use the designated switch or dimmer on the wall, if applicable.
9. If necessary, adjust the direction of the light sources by rotating or tilting them according to your preference.
10. For any further assistance or troubleshooting, refer to the contact information provided by Paul Neuhaus GmbH.
Please note that the above instructions are a general guideline. It is always recommended to refer to the specific manual provided with the product for detailed and accurate installation and operation instructions.
Add New Comment