User Manual Q&AAnswer
Mar 13, 2025 - 12:15 PM
To install and set up the Leuchten Direkt 997426 Holly light fixture, please follow the steps outlined in the instruction manual provided.
1. Mounting the fixture:
a. Choose a suitable location for the light fixture.
b. Ensure the mounting surface is sturdy and can support the weight of the fixture.
c. Use the provided screws and anchors to secure the fixture to the mounting surface.
2. Electrical connection:
a. Before starting any electrical work, make sure the power is turned off at the main switch.
b. Connect the wires from the fixture to the corresponding wires in your electrical supply.
c. Use wire connectors to secure the connections and ensure proper insulation.
d. Double-check all connections to ensure they are secure and properly insulated.
3. Light source installation:
a. Remove any protective packaging from the light source.
b. Follow the instructions provided with the specific light source to install it correctly.
c. Make sure the light source is securely fitted and aligned within the fixture.
4. Final adjustments:
a. Once the fixture is securely mounted and the light source is installed, turn on the power.
b. Test the light fixture to ensure it is functioning properly.
c. If necessary, adjust the position or angle of the fixture to achieve the desired lighting effect.
Please note that these instructions are a general guideline, and it is essential to refer to the specific instruction manual provided with the Leuchten Direkt 997426 Holly light fixture for detailed and accurate installation steps.
Add New Comment