User Manual Q&AAnswer
Mar 13, 2025 - 12:07 PM
To assign the remote control to the Neuhaus Lighting Group 270161 FLAT LED Ceiling Light, please follow these steps:
1. Turn on the light using the wall switch.
2. Within 6 seconds, press the "OFF" button on the remote control and hold it down for 2 seconds.
3. If the light flickers 3 times, it means the teaching process was successful, and the remote control is now assigned to the light.
If the light does not flicker after holding down the "OFF" button, please try the following:
1. Turn off the light for 10 seconds.
2. Repeat the above process, starting from step 1.
Once the light has been successfully assigned, it can only be operated using the assigned remote control.
If you have any further questions or need assistance, you can contact SellTec GmbH, the manufacturer, at +49(0)2922 9721 9290 or via email at Kundenservice@neuhaus-group.de. You can also visit their website at www.neuhaus-group.de for more information.
Add New Comment