How do I install and set up the xtralis VESDA-E VEP Aspirating Smoke Detector? (xtralis VESDA-E VEP Aspirating Smoke Detector User Guide)

Answer

manuals.plus

Mar 13, 2025 - 12:02 PM


Installation and setup of the xtralis VESDA-E VEP Aspirating Smoke Detector can be done by following the steps outlined in the user guide. Here is a general overview of the installation process:

1. Determine the optimal location: Choose a location that provides maximum coverage for smoke detection. Consider factors such as airflow, potential obstructions, and accessibility for maintenance.

2. Mount the detector: Use the provided mounting bracket to securely attach the detector to the desired location. Ensure that it is mounted at the correct height and angle as specified in the user guide.

3. Connect power: Connect the power supply unit (PSU) to the detector. The PSU provides operating power, including battery backup, for the VESDA-E detector. Follow the instructions in the user guide for proper wiring and connection.

4. Configure the detector: Use the VSC (VESDA System Configurator) software to configure the detector settings. Connect a PC to the detector using the USB port and follow the instructions in the user guide to set up parameters such as alarm levels, sensitivity, and network connectivity.

5. Test the detector: Perform a smoke test to ensure the detector is functioning correctly. Follow the instructions in the user guide for conducting a smoke test and interpreting the alarm signals.

For more detailed instructions and troubleshooting information, refer to the xtralis VESDA-E VEP Aspirating Smoke Detector User Guide.