How do I install the RL 2042 Jones Small Single Sconce? (RALPH LAUREN Jones Small Single Sconce Instruction Manual)

Answer

manuals.plus

Mar 13, 2025 - 11:50 AM


To install the RL 2042 Jones Small Single Sconce, follow these steps:

1. Carefully remove all parts from the box.
2. Remove the mounting plate (B) from the fixture body (D) by loosening screws (E).
3. Affix the mounting plate (B) onto the outlet box and secure it with mounting screws (C).
4. Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.
5. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE). Make sure not to reverse the hot and neutral connections as it compromises safety.
6. Connect the ground wire from the fixture (bare copper) to the ground wire from the outlet box (usually green or copper in color). It is imperative that the fixture be grounded.
7. Attach the fixture body (D) onto the mounting plate (B) and secure it with screws (E).
8. Thread the crystal (F) to the fixture body (D).
9. Once the installation is complete, turn on the power at the fuse or circuit breaker.

Please note that it is essential to follow all applicable local installation codes and have a person familiar with the construction and operation of the fixture perform the installation. Additionally, retain all packaging material until the installation is complete and approved.

For cleaning the fixture, use only a soft dry cloth or a feather duster. Avoid using abrasive or chemical agents.