User Manual Q&AAnswer
Mar 13, 2025 - 11:37 AM
To connect the SAE Audio Power Amplifier famousound-i-2x1200w to your audio system, follow these steps:
1. Ensure that the power supply voltage matches the requirement of the amplifier.
2. Connect your audio source to the balanced input XLR-F on the rear panel of the amplifier.
3. Connect your speakers to the NL4 SPEAKON speaker output connectors on the rear panel. Make sure to use qualified NL4 SPEAKON connectors.
4. Set the sensitivity selection switch on the rear panel based on your audio system configuration and requirements.
5. Set the stereo/parallel/bridge switch on the rear panel according to your desired mode of operation.
6. Turn on the amplifier by following the recommended sequence: Pre-Amp -> Amplifier.
7. Adjust the volume using the gain controller xxxx on the front panel.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment