Answer

Mar 13, 2025 - 11:28 AM
To set up and configure the airFiber 60 XR Ubiquiti Switch Network, please follow the steps outlined in the user manual. Here is a step-by-step guide:
1. Mount the airFiber 60 XR device in a suitable location, ensuring it has a clear line of sight to the other airFiber device(s) you want to connect to.
2. Connect the airFiber 60 XR device to your network using an Ethernet cable. Plug one end of the cable into the Ethernet port on the airFiber 60 XR device and the other end into a network switch or router.
3. Power on the airFiber 60 XR device by connecting the included power adapter to the power port on the device and plugging it into a power outlet.
4. Wait for the airFiber 60 XR device to boot up. The device will go through a series of self-tests and initialization procedures.
5. Once the device is booted up, you can access the airFiber Configuration Interface by opening a web browser and entering the default IP address of the device (usually 192.168.1.20) into the address bar.
6. Log in to the airFiber Configuration Interface using the default username and password provided in the user manual. It is recommended to change the default password for security purposes.
7. In the airFiber Configuration Interface, you can configure various settings such as network mode, channel width, frequency, transmit power, encryption, and more. Refer to the user manual for detailed instructions on each setting.
8. After configuring the desired settings, click on the "Apply" or "Save" button to save the changes.
9. Test the connection between the airFiber 60 XR device and the other airFiber device(s) to ensure a successful link is established.
For more detailed instructions and troubleshooting tips, please refer to the airFiber 60 XR Ubiquiti Switch Network User Manual.
Add New Comment