Answer

Mar 13, 2025 - 10:26 AM
To install the SHADA Downlight Round LED All-in-one Panel, please follow the instructions below:
1. Before installation, make sure you have read and understood the instructions provided in the installation guide.
2. Ensure that the power source is disconnected before starting the installation process to avoid any risk of electric shock.
3. Carefully examine the product and make sure there are no damages or defects. If any part is damaged or defective, replace the product immediately.
4. Find a suitable location for the downlight panel. Ensure that the area is well-ventilated to prevent overheating.
5. Follow the provided installation/wire diagram (if applicable) to correctly connect the panel to the power source. If you are not familiar with electrical installations, it is recommended to seek assistance from a qualified technician.
6. Once the panel is securely connected, ensure that it is properly mounted or installed according to the instructions provided in the manual.
7. After installation, double-check all connections to ensure they are secure and properly insulated.
8. Once the installation is complete, you can switch on the power source and test the functionality of the downlight panel.
Note: If you encounter any problems during installation or usage, it is advised to disconnect the product from the power source and seek further assistance from the manufacturer or visit their website for support.
Remember to keep the installation guide for future reference and only use the product as described in the manual to avoid any potential damage or injury.
Add New Comment