User Manual Q&AAnswer
Mar 13, 2025 - 10:18 AM
To assemble the SMYTHS TOYS TX-TF-PI-8FT Jump Power 8ft Trampoline, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Start by selecting a flat and level surface for the trampoline, such as grass or sand. Avoid placing it on a hard surface like concrete or asphalt.
2. Begin assembling the trampoline by adding the springs in the correct order as shown in the provided images. It is important to insert the springs in the specified order and not randomly.
3. Make sure to check that all bolts are correctly screwed and re- xxxx them if necessary.
4. Ensure that the springs are intact and securely attached, so they cannot come unhooked when jumping.
5. Check that the circular protective pad covers the springs properly.
6. Verify that the bolt and edge protection caps are in place and replace them if necessary.
7. Examine the cord used to secure the net and ensure it is in good condition. Be cautious of the danger of suffocation.
8. Inspect the net, trampoline mat, and all protective elements to ensure they are in good condition and capable of supporting the user's weight. Replace any damaged parts, if necessary.
9. Strong winds can pose a risk, so it is recommended to secure the trampoline by removing the bounce mat and net to reduce wind resistance. Consider using a ground anchoring system recommended by an outdoor equipment specialist.
10. During winter, snow and extreme cold can damage the trampoline. It is advised to dismantle the net, trampoline mat, and protective elements and store them indoors.
11. It is recommended to replace the net, trampoline mat, and protective elements every year.
12. If any parts are defective, they should be replaced according to the manufacturer's instructions. For further assistance, refer to the contact information provided in the user's guide.
If you encounter any difficulties during the assembly process or have specific questions, please consult the provided instruction manual for more detailed instructions and illustrations.
Add New Comment