User Manual Q&AAnswer
Mar 13, 2025 - 10:13 AM
To measure DC voltage using the PeakTech 3202 Analog Measuring Instrument, follow these steps:
1. Always start with the highest measuring range.
2. Select the corresponding measuring range (0.1V ~ 500V DCV) using the range switch on the front panel.
3. Insert the black test lead into the "COM" socket and the red test lead into the "V" socket.
4. Connect the test leads in parallel to the circuit or component you want to measure.
5. Read the measured value from the analogue display.
Note: It is important to always start with the highest measuring range and select the appropriate range based on the voltage you expect to measure.
Add New Comment