Answer

Mar 13, 2025 - 09:54 AM
To install the ZUMA Lumisonic and Luminaire Flush Mount Kit, please follow the steps below:
1. Drilling Holes: Use a 12cm hole saw to cut holes in your ceiling where you intend to install the Flush Mount Adapters.
2. Insert the Flush Mount Adapter: Bring the Flush Mount Adapter to the ceiling and carefully push it into the hole.
3. xxxx into the Ceiling: Use #3 plasterboard screws to secure the Flush Mount Adapter to the ceiling. Make sure there is some batten inside the ceiling for the screws to grip onto.
4. Plaster the Ceiling: Apply plaster skin on the ceiling to cover the mounting face.
5. Remove the Plug: Once the plaster skin has set and the ceiling has been painted, remove the protective plug and discard it. You are now ready to install your ZUMA unit.
6. Install the ZUMA Unit: Refer to the ZUMA Installer Guide for instructions on how to install your ZUMA unit.
For more detailed instructions and information, please refer to the ZUMA Installer Guide provided with your product. If you have any further questions or need assistance, you can visit the ZUMA website at www.zuma.ai or contact their customer support.
Add New Comment