Answer

Mar 13, 2025 - 09:50 AM
To assemble the Yorkville PSA1RIGKIT Sound Rig Kit for PSA1, please follow these steps:
1. Remove the four screws, hex nuts, and washers from each PSA1 enclosure.
2. Ratchet-strap the desired number of enclosures together on level ground, ensuring they are properly aligned.
3. The PSA1RIGKIT includes a left bracket and a right bracket. Install the LEFT bracket on the left side of the speaker, facing the front of the cabinet. The "L" on the bracket should be placed towards the cabinet, leaving it unseen when properly mounted.
4. Loosely position the brackets in place of the handles on the upper-most enclosure, using the bolts to help with alignment. Do not tighten until positioned correctly. Work from the highest to the lowest enclosure in the array.
5. Once all brackets are in place and aligned, tighten the nuts and bolts properly. For PSA1s manufactured after February 2012, the handles have built-in threading, and no nuts are required.
6. Mount the PSA1FRAMEKIT (with the 10-point mounting holes) to the upper-most enclosure using the portion of the bracket that protrudes. Ensure the groove of the PSA1FRAMEKIT bumper mates perfectly with the top PSA1RIGKIT.
7. Attach the two supplied painted cross-members to the PSA1FRAMEKIT on the upper-most enclosure. The cross-members should be attached to the front and rear of the 10-point mounting hole PSA1FRAMEKIT side brackets. Make sure the "lip" of the cross-members is facing inwards towards each other.
8. Use two bolts and hex nuts per corner to secure the cross-members.
9. Attach a minimum of two ½-inch shackles (Crosby part #1017494) to each array. The shackles can be mounted on any of the 10 pickup points along the PSA1FRAMEKIT's bumper. Ensure the pickup points chosen correspond on both sides of the array.
10. Reinstall the PSA1 amplifier modules by connecting the amplifier/speaker connectors carefully and refitting each module in the cavities using the original screws.
11. When the array is safely and properly assembled for flying, it is recommended to have a professional rigging technician assist with the installation.
For further assistance or any questions, please contact Yorkville Support directly at support@yorkville.com.
Add New Comment