Answer

Mar 13, 2025 - 09:47 AM
To install the MT-09 Front Spoiler Puig Naked, please follow the steps below:
1. Start by gathering all the necessary parts and tools mentioned in the instruction manual.
2. Begin the installation by removing any existing front spoiler or parts from your motorcycle, if applicable.
3. Take the naked frontal spoiler (part number 21133J/CM3) and position it in the desired location on the front of your motorcycle.
4. Attach the aluminum support (part number SOP1P5--- 21133) to the naked frontal spoiler using the provided M5x16 Ø11 ISO 7380 Allen screws (part number TORNI-I7380-493). Make sure to use the Ø4,5 x Ø11 x 2mm rubber washers (part number provided) between the screws and the spoiler for proper installation.
5. Secure the naked frontal spoiler to your motorcycle's frame using the provided M5x12 Ø11 ISO 7380 Allen screws (part number TORNI-AI---- 520) and M5 ISO 7380 xxxx caps (part number TAPON-------- 85). Use the M5x1 Nylon washers (part number ARNV00000000245) between the screws and the frame for added stability.
6. Once all the screws are tightened, ensure that the naked frontal spoiler is securely attached to your motorcycle.
7. Finally, double-check all the connections and make any necessary adjustments to ensure proper fitment and alignment.
For further assistance or detailed visual instructions, you can refer to the instruction manual provided with the product or visit the manufacturer's website at www.puig.tv or www.puigusa.com. If you have any additional questions or concerns, you can contact Puig directly via email at info@puig.tv or info@puigusa.com.
Add New Comment