Answer

Mar 13, 2025 - 09:43 AM
https://manuals.plus/wp-content/uploa...
Copy URL to clipboard
ATTACHMENT DISPLAY SETTINGS
Alignment
Center
Link To
None
Size
Full Size – 633 × 440
Selected media actions
8 items selected
Edit SelectionClear Insert into post" width="413" height="287" />
To connect the Yorkville PSA1 Paraline Series loudspeaker to a power source, follow these steps:
1. Locate the AC Input on the back of the loudspeaker. It accepts locking IEC power cords.
2. Plug one end of the power cord into the AC Input of the loudspeaker.
3. Plug the other end of the power cord into a standard AC power outlet.
4. Ensure that the power switch on the loudspeaker is turned to the On position.
5. The green power LED on the loudspeaker will illuminate, indicating that power is supplied.
Note: It is important to use a power source with the voltage specified in the owner's manual or as marked on the unit. Do not use an extension cord or receptacle unless the plug can be fully inserted.
Add New Comment