User Manual Q&AAnswer
Mar 13, 2025 - 08:50 AM
Installation of the AcuityBrands CPXC 2X2 TUWH 120 Smart CPX LED luminaire with motion sensor requires following these steps:
1. Ensure safety: Before installation, turn off the power at the circuit breaker box and wear safety glasses and gloves.
2. T-Bar ceiling grid installation: If installing in a T-bar ceiling, secure the luminaire to the T-bar grid by bending the built-in T-bar clips in all four corners of the luminaire. Use hanger wire to support the luminaire in at least two opposite corners, attaching it to the building structure. Make sure to follow local codes for proper installation.
3. Electrical connections: From above the ceiling, remove the junction box cover and locate the driver supply wires (1 black, 1 white, 1 green/ground). Remove one knockout in the access plate and attach the building supply conduit. Make electrical connections according to local codes, ensuring the power is turned off. Secure the junction box covers back into the luminaire with a xxxx .
4. Power on and testing: Turn on the power at the circuit breaker and test the successful installation.
For more detailed instructions and illustrations, please refer to the AcuityBrands CPXC 2X2 TUWH 120 Smart CPX LED Instruction Manual provided with the product.
Add New Comment