Answer

Mar 13, 2025 - 08:47 AM
To install the FISHER PAYKEL HC90PLX4 90cm Wall Rangehood, follow these steps:
1. Determine the installation type: The rangehood can be either externally ducted or internally recirculated. Choose the appropriate installation type based on your kitchen setup.
2. Prepare the installation area: Ensure that the wall where the rangehood will be installed is sturdy and capable of supporting the weight. Clear any obstructions and ensure there is enough space for the rangehood.
3. Mount the rangehood: Attach the mounting bracket to the wall using appropriate screws and anchors. Make sure it is level. Then, attach the rangehood to the mounting bracket.
4. Connect the ducting (if applicable): If you are externally ducting the rangehood, connect the ducting to the rangehood and route it to the outside of your home. If you are recirculating, install the recirculation diverter according to the instructions provided.
5. Adjust the chimney height: The chimney height is adjustable to fit different ceiling heights. Follow the instructions in the manual to adjust the height accordingly.
6. Install the filters: The rangehood comes with three dishwasher-safe filters. Insert the filters into the designated slots in the rangehood. These filters effectively trap grease particles during extraction.
7. Connect the power: Ensure that the power supply is turned off before connecting the rangehood to the electrical outlet. Follow the instructions provided in the manual for electrical connections.
8. Test the rangehood: Once the installation is complete, turn on the rangehood and test the different fan speeds to ensure proper operation.
For more detailed instructions and illustrations, please refer to the FISHER PAYKEL HC90PLX4 90cm Wall Rangehood User Guide.
Add New Comment