User Manual Q&AAnswer
Mar 13, 2025 - 08:43 AM
To install the Commercial Electric 81775 4 Inch Cross Bar, please follow these steps:
1. Turn off the power supply before starting the installation to ensure your safety.
2. Take the fixture screws (not included) and thread them through the crossbar towards the light fixture. Align the screws with the holes on the fixture that you want to mount.
3. Position the flat side of the crossbar against the electrical box.
4. Use two crossbar screws (not included) to secure the crossbar to the electrical box. Make sure it is securely fastened.
5. Align the fixture with the protruding screws and use the nuts supplied with the fixture to secure it in place.
Please note that this product does not include hardware, so you will need to provide your own fixture screws and crossbar screws. Also, make sure to install and use the product according to your local electrical codes for safety.
If you have any further questions or concerns, please refer to the product manual or contact the manufacturer or distributor for assistance.
Add New Comment