How do I properly load and use the Vestil CARPET-D Portable Carpet Dispenser? (Vestil CARPET-D Portable Carpet Dispenser User Guide)

Answer

manuals.plus

Mar 13, 2025 - 08:21 AM


To properly load and use the Vestil CARPET-D Portable Carpet Dispenser, follow these steps:

1. Center the roll of carpet on the truck. Ensure that the weight of the carpet roll does not exceed the truck's capacity of 500 pounds (227.3kg). If the carpet roll is heavier, use another device to move it. The end/edge of the carpet should be on top of the roll.

2. Retract both leg sets. Each leg set is fixed in the extended or retracted position by a spring pin. Grasp the wire ring and pull the spring pin out of the pin hole of the leg bracket. Push the leg set towards the frame and release the spring pin. The pin should seat into the semicircular hole in the leg bracket.

3. Grasp one end of the roll and carefully push the truck. Avoid traversing sloped ground with a loaded truck unless you can easily control it. Always remain uphill from the truck. If you cannot push or control the truck when it is loaded, ask a coworker to assist you. Both persons should grasp the same end of the roll and push the truck wherever needed.

It is important to note that proper use, maintenance, and storage are essential for the product to function properly. Regularly inspect and maintain the unit as directed in the "Inspections & Maintenance" section of the user manual. Additionally, ensure that you comply with all safety instructions and guidelines provided in the manual to avoid any potential risks or accidents.