User Manual Q&AAnswer
Mar 13, 2025 - 03:56 AM
To configure the ENTTEC 71030 Universes Bi-Directional eDMX to DMX Conversion device, you can use the web interface. Here is a step-by-step guide:
1. Connect your computer to the same network as the ENTTEC device.
2. Open a web browser (preferably a Chromium-based browser like Google Chrome).
3. Enter the IP address of the ENTTEC device in the URL field of the web browser. If you don't know the IP address, you can use an IP scanning software or ENTTEC EMU software to discover the device.
4. The web interface will load the Home tab, which provides an overview of the device's information.
5. Click on the Settings tab to access the configuration options.
6. In the Settings tab, you can modify various parameters:
- Node Name: Set the name of the ENTTEC device for discovery purposes.
- DHCP: Enable or disable DHCP. If disabled, you can set a static IP address for the device.
- IP Address / NetMask / Gateway: Set the static IP address, netmask, and gateway if DHCP is disabled.
- sACN CID: View the unique sACN Component Identifier (CID) of the device.
- Type: Choose the type of operation for the device (Disabled, Input, or Output).
- Protocol: Select the protocol for the device (Art-Net, sACN, or ESP).
- RDM: Enable or disable RDM (Remote Device Management) if using Art-Net protocol.
- Universe: Set the input universe for the Ethernet-DMX protocol.
- Refresh Rate: Adjust the rate at which the device outputs DMX data.
- Options: Additional configuration options depending on the port type and protocol.
- Save settings: Click this button to save any changes made.
7. You can also access other tabs in the web interface, such as Network Stats for network data overview and Update Firmware for updating the device's firmware.
8. After making any changes, remember to save the settings for them to take effect.
9. If needed, you can factory reset the device by clicking on the Factory Default button in the Settings tab.
10. Once you have finished configuring the device, you can close the web browser.
Please note that the above instructions are a general guide, and it is recommended to refer to the ENTTEC 71030 Universes Bi-Directional eDMX to DMX Conversion User Manual for detailed information and specific steps.
Add New Comment