User Manual Q&AAnswer
Mar 13, 2025 - 03:51 AM
To assemble the KaWe H-800 LED Head Lamp, follow these steps:
1. Connect the headlamp to the KaWe lithium-ion battery. There is a cable on the right side of the headlamp that should be directly connected to the battery for the head rim or the battery cable for belt fastening.
2. If using the battery for the head rim, fasten it to the back side of the head rim. Insert the clamping elements of the battery body into the grooves on the back side of the head rim and clamp it with a light movement. To disconnect the clamping elements, move them together in the opposite direction.
3. The binocular loupe can be fastened on the back in a holder under the lamp body. Loosen the fastening xxxx on the joint of the binocular loupe, insert it into the holder, and fix the fastening xxxx in the threaded hole on the front side. Adjust the position of the binocular loupes by slightly loosening them and then tightening the fastening xxxx to secure them in the desired position.
To disassemble the , reverse the assembly steps mentioned above.
Please note that it is important to follow the instructions provided in the user manual for proper assembly and disassembly of the headlamp.
Add New Comment