User Manual Q&AAnswer
Mar 13, 2025 - 03:46 AM
The EPEVER MT75 Remote Control Monitor can be installed either through wall installation or surface mounting installation. Here are the steps for each method:
Wall Installation:
1. Locate and drill xxxx holes based on the frame mounting dimension (175x50mm) and erect the plastic expansion bolts.
2. Use four M5 self-tapping screws to fix the frame.
3. Remove the decorative shell.
4. Use two M4 pan head screws to mount the MT75 surface on the base.
5. Install the decorative shell.
Surface Mounting Installation:
1. Locate based on the installation size (176mm) and drill xxxx holes (no smaller than 158.2x85.2mm).
2. Remove the decorative shell.
3. Use two M4 pan head screws to fix MT75.
4. Install the decorative shell.
Please refer to the "Installation Instructions" section in the user manual for more detailed instructions and illustrations.
Note: It is important to follow the safety instructions and precautions mentioned in the manual before installing the MT75 Remote Control Monitor.
Add New Comment