How do I use the ANKER PowerPort II with 2 PIQ Wall Charger? (Anker PowerPort II 2 PIQ Wall Charger User Manual)

Answer

manuals.plus

Mar 13, 2025 - 03:44 AM

To use the ANKER 323 PowerPort II with 2 PIQ Wall Charger, follow these steps:

1. Make sure the charger is plugged into a power outlet that matches the input specifications mentioned in the manual (100-240V~ 1A 50-60Hz).

2. The charger has two ports: USB-C and USB-A. You can use either one port or both ports simultaneously.

3. If you are using only one port, connect your device to either the USB-C or USB-A port using a compatible charging cable.

4. The charger supports different output voltages and currents depending on the port and device you are using. Refer to the specifications mentioned in the manual for the specific output values.

5. If you are using both ports simultaneously, you can connect one device to the USB-C port and another device to the USB-A port. The total output power for both ports combined should not exceed 33W.

6. The charger has an average active efficiency of 86.29% and a low load efficiency of 72.11%. It also has a no-load power consumption of 0.06W.

7. The recommended operating temperature for the charger is between 0-25℃ / 32-77 ℉.

8. If you have any issues or questions about the charger, you can contact ANKER customer service for assistance. They provide an 18-month limited warranty and lifetime technical support.

Please note that this answer is based on the information provided in the user manual for the ANKER 323 PowerPort II with 2 PIQ Wall Charger. For more detailed instructions or specific troubleshooting, it is recommended to refer to the manual or contact ANKER customer service.