User Manual Q&AAnswer
Mar 13, 2025 - 03:32 AM
To install the HARVIA HPC3 Cilindro Heater Guard, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that the heater is turned off and completely cooled down before starting the installation process.
2. Place the heater guard on a flat surface near the heater. Make sure that there is enough space around the heater for proper airflow.
3. Attach the guard to the heater by aligning the holes on the guard with the corresponding holes on the heater. Use the provided screws to secure the guard in place. Tighten the screws firmly, but do not overtighten.
4. Once the guard is securely attached, check that it is properly aligned and centered around the heater.
5. After installation, inspect the guard to ensure that it is securely fastened and there are no loose parts.
6. Finally, before using the heater, double-check that the guard does not obstruct any essential parts or vents of the heater.
Please note that this is a general guide, and it is essential to refer to the specific instructions provided in the HARVIA HPC3 Cilindro Heater Guard Instruction Manual for accurate installation steps and any additional precautions or requirements.
Add New Comment