Answer

Mar 13, 2025 - 03:25 AM
To install the safety glass on the HARVIA HMD3 Electric Sauna Heater, please follow the steps provided in the instruction manual:
1. Ensure that the sauna heater is turned off and disconnected from the power supply before starting the installation process.
2. Carefully unpack the safety glass and inspect it for any damages or defects. If you notice any issues, please contact Harvia customer support for assistance.
3. Position the safety glass in front of the heater opening, ensuring that it aligns properly with the mounting holes on the heater.
4. Insert the screws provided through the mounting holes on the heater and into the corresponding holes on the safety glass. Use a screwdriver to tighten the screws securely, but be cautious not to overtighten and risk damaging the glass.
5. Once all the screws are tightened, double-check the alignment and stability of the safety glass. Ensure that it is securely attached to the sauna heater.
6. After the installation is complete, reconnect the sauna heater to the power supply and follow the instructions in the user manual for operating the sauna heater safely.
Note: It is essential to refer to the specific instructions provided in the HARVIA HMD3 Electric Sauna Heater Safety Glass Instruction Manual for accurate installation steps and any additional precautions or recommendations.
Add New Comment